Siemens RUGGEDCOM ROX II User Manual

Chapter 2
Using RUGGEDCOM ROX II
RUGGEDCOM ROX II
CLI User Guide
48 Accessing Service Mode
1. Connect to RUGGEDCOM ROX II through the RS-232 console connection and a terminal application. For more
information, refer to Section3.1.2, “Connecting Directly”.
2. Reboot the device. For more information, refer to Section4.5, “Rebooting the Device”.
3. As soon as the device starts to boot up, press ESC. A list of possible boot modes for each partition appears.
****Boot Partition 4****
[4-0]: Debian GNU/Linux, kernel 3.0.0-2-8360e
[4-1]: Debian GNU/Linux, kernel 3.0.0-2-8360e (BIST mode)
[4-2]: Debian GNU/Linux, kernel 3.0.0-2-8360e (single-user mode)
[4-3]: Debian GNU/Linux, kernel 3.0.0-2-8360e (service mode)
****Boot Partition 6****
[6-0]: Debian GNU/Linux, kernel 3.0.0-2-8360e
[6-1]: Debian GNU/Linux, kernel 3.0.0-2-8360e (BIST mode)
[6-2]: Debian GNU/Linux, kernel 3.0.0-2-8360e (single-user mode)
[6-3]: Debian GNU/Linux, kernel 3.0.0-2-8360e (service mode)
Auto booting [4-0], Hit [ESC] key to stop: 0
Welcome to the boot menu. Please select from the following options:
Enter [BootPartition-BootTarget] (e.g. '4.0') to boot.
'h' Show this help menu
'l' List the available boot targets
'c' Exit to the boot loader command line
Will reboot after 60 seconds of inactivity
:
NOTE
In the example above, the text
Auto booting [4-0]
indicates the active partition is Boot Partition 4.
4. Enter service mode on the active partition by typing the associated target number. For example, if the active
partition is Boot Partition 6, type 6-3. A login prompt for service mode appears.
5. Type root and press Enter. A password prompt appears.
NOTE
If a unique password/passphrase has not been configured, use the factory default password. For
more information, refer to Section2.1, “Default User Names and Passwords”.
NOTE
The current service mode password/passphrase is the same as the password/passphrase for
accessing maintenance mode.
6. Type the current service mode password/passphrase and press Enter.
ruggedcom login: root
Password:
Last login: Tue Oct 13 13:37:38 EDT 2020 on ttyS0
Linux ruggedcom 3.0.0-2-8360e #1 Thu Jan 24 21:20:30 UTC 2013 ppc
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.

Siemens RUGGEDCOM ROX II Specifications

General

Brand	Siemens
Model	RUGGEDCOM ROX II
Category	Network Hardware
Language	English