Cisco ONS 15454 DWDM - Page 1057

B-27
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
December 2006
Appendix B Hardware Specifications
B.4.13 AD-1B-xx.x Card Specifications
Table B-12 lists AD-1B-xx.x optical specifications.
Table B-13 lists the range of wavelengths for the receive (express) band.
AD-1B-58.1 B58.1 58.1 192.4 1558.17
58.5 192.35 1558.58
58.9 192.3 1558.98
59.3 192.25 1559.39
59.7 192.2 1559.79
60.2 192.15 1560.20
60.6 192.1 1560.61
61.0 192.05 1561.01
Table B-11 AD-1B-xx.x Channel Allocation Plan by Band (continued)
Unit Name Band ID Channel ID Frequency (GHz) Wavelength (nm)
Table B-12 AD-1B-xx.x Optical Specifications
Parameter Note Condition Min Max Unit
–1 dB bandwidth All SOP and within whole
operating environmental range
COM Rx—Band Tx
Band Rx—COM Tx
3.6 — nm
–1 dB bandwidth All SOP and within whole
operating temperature range
COM Rx—Exp Tx
Exp Rx—COM Tx
Refer to
Table B-13.
nm
Insertion loss
(drop section)
All SOP and within whole
operating environmental range;
two connectors included, VOA set
at minimum attenuation
COM Rx—Band Tx — 3.0 dB
Insertion loss
(express section)
All SOP and within whole
operating environmental range;
two connectors included
Exp Rx—COM Tx — 1.6 dB
All SOP and within whole
operating environmental range;
two connectors included, VOA set
at its minimum attenuation
COM Rx—Exp Tx — 2.2 dB
Insertion loss
(add section)
All SOP and within whole
operating environmental range;
two connectors included
Band Rx—COM Tx — 2.2 dB
VOA dynamic
range
——30—dB
Maximum optical
input power
——300—mW