5-82
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
September 2005
Chapter 5 Provision Transponder and Muxponder Cards
DLP-G308 Provision the MXP_MR_2.5G and MXPP_MR_2.5G Client Port Alarm and TCA Thresholds
Step 8 Click Apply.
Step 9 Repeat Steps 7 and 8 to provision each additional client port. Otherwise, continue with Step 10.
Step 10 Return to your originating procedure (NTP).
ONE_GE 15454-SFP-GEFC-SX
15454E-SFP-GEFC-S
–20 3 –13 –1
15454-SFP-GE+-LX
15454E-SFP-GE+-LX
–23 0 –13 0
Table 5-49 MXP_MR_2.5G and MXPP_MR_2.5G Card Client Interface Alarm Thresholds
Port Type
(by CTC)
Pluggable Port
Module (XFP)
Alarm RX
Power Low
Alarm RX
Power High
Alarm TX
Power Low
Alarm TX
Power High
To Next Page
Loading...
