-63
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Chapter
DLP-G207 Change Optical Channel Threshold Settings for OPT-PRE and OPT-BST Amplifiers 11-18
DLP-G322 Change the OPT-BST ALS Maintenance Settings 11-22
DLP-G208 Change Optical Line Settings for Multiplexer and Demultiplexer Cards 11-24
DLP-G209 Change Optical Line Threshold Settings for Multiplexer and Demultiplexer Cards 11-26
DLP-G210 Change Optical Channel Settings for Multiplexer and Demultiplexer Cards 11-27
DLP-G211 Change Optical Channel Threshold Settings for Multiplexer and Demultiplexer Cards 11-30
DLP-G212 Change Optical Channel Parameters for the 32WSS Card 11-33
DLP-G213 Change the 32WSS Optical Channel Thresholds 11-36
DLP-G214 Change Optical Line Parameters for the 32WSS Card 11-39
DLP-G215 Change the 32WSS Card Optical Line Thresholds 11-40
DLP-G245 Change External Alarms Using the AIC-I Card 11-42
DLP-G246 Change External Controls Using the AIC-I Card 11-43
DLP-G247 Change AIC-I Card Orderwire Settings 11-44
DLP-G254 Place OPT-BST and OPT-PRE Ports Out of Service 12-3
DLP-G318 Place OPT-BST and OPT-PRE Ports In Service 12-4
DLP-G248 Use the Reinitialization Tool to Clear the Database and Upload Software (Windows) 13-5
DLP-G249 Use the Reinitialization Tool to Clear the Database and Upload Software (UNIX) 13-7
DLP-G298 View IS-IS Routing Information Base 13-9
DLP-G299 View ES-IS Routing Information Base 13-10
DLP-G300 Manage the TARP Data Cache 13-11
DLP-G250 Reset the TCC2/TCC2P Card 13-12
DLP-G251 Reset DWDM Cards Using CTC 13-13
DLP-G259 Manual or Force Switch the Node Timing Reference 13-18
DLP-G260 Clear a Manual or Force Switch on a Node Timing Reference 13-19
DLP-G261 Scope and Clean Fiber Connectors and Adapters with Alcohol and Dry Wipes 13-26
DLP-G262 Clean Fiber Connectors with CLETOP 13-27
DLP-G263 Clean the Fiber Adapters 13-27
To Next Page
Loading...
