Cisco ONS 15454 DWDM - Page 62

-62
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
Chapter
DLP-G174 Switch Between TDM and DWDM Network Views 10-31
DLP-G175 Modify a Y-Cable Protection Group 10-32
DLP-G176 Modify a Splitter Protection Group 10-33
DLP-G177 Delete a Y-Cable Protection Group 10-33
DLP-G178 Apply a Manual Y-Cable or Splitter Protection Switch 10-35
DLP-G179 Apply a Force Y-Cable or Splitter Protection Switch 10-35
DLP-G180 Clear a Manual or Force Y-Cable or Splitter Protection Switch 10-36
DLP-G181 Apply a Lock-On 10-37
DLP-G182 Apply a Lockout 10-37
DLP-G183 Clear a Lock-On or Lockout 10-38
DLP-G184 Change a GCC Termination 10-40
DLP-G185 Delete a GCC Termination 10-40
DLP-G186 Delete an OSC Termination 10-41
DLP-G187 Delete a Provisionable Patchcord 10-42
DLP-G188 Change Security Policy for a Single Node 10-46
DLP-G189 Change Security Policy for Multiple Nodes 10-47
DLP-G317 Change Node Access and PM Clearing Privilege 10-49
DLP-G191 Change User Password and Security Level on a Single Node 10-50
DLP-G192 Change User Password and Security Level for Multiple Nodes 10-51
DLP-G193 Delete a User From a Single Node 10-52
DLP-G194 Delete a User From Multiple Nodes 10-52
DLP-G195 Log Out a User on a Single Node 10-53
DLP-G196 Log Out a User on Multiple Nodes 10-54
DLP-G281 Configure the Node for RADIUS Authentication 10-55
DLP-G282 View and Terminate Active Logins 10-57
DLP-G197 Modify SNMP Trap Destinations 10-61
DLP-G198 Delete SNMP Trap Destinations 10-62
DLP-G199 Change the OSCM and OSC-CSM Optical Service Channel Settings 11-2
DLP-G200 Change the OSCM and OSC-CSM Optical Service Channel Thresholds 11-5
DLP-G201 Change Optical Line Parameters for OSCM and OSC-CSM Cards 11-6
DLP-G202 Change the OSCM and OSC-CSM Optical Line Threshold Settings 11-8
DLP-G203 Change the OSCM and OSC-CSM ALS Maintenance Settings 11-10
DLP-G204 Change Optical Line Settings for OPT-PRE and OPT-BST Amplifiers 11-12
DLP-G205 Change Optical Line Threshold Settings for OPT-PRE and OPT-BST Amplifiers 11-14
DLP-G206 Change Optical Amplifier Line Settings for OPT-PRE and OPT-BST Amplifiers 11-16