Siemens RUGGEDCOM ROX II - Page 564

Chapter 13
Unicast and Multicast Routing
RUGGEDCOM ROX II
CLI User Guide
518 Viewing the Status of Dynamic BGP Routes
Parameter Description
version Synopsis:  A 32-bit signed integer
BGP version.
as Synopsis:  A string
Remote AS number.
msgrcvd Synopsis:  A 32-bit signed integer
Number of received BGP messages.
msgsent Synopsis:  A 32-bit signed integer
Number of sent BGP messages.
uptime Synopsis:  A string
Peer up time.
state Synopsis:  A string
Connection state with this neighbor.
prefix-received Synopsis:  A string
Number of prefixes (networks) received from this neighbor.
Parameter Description
network Synopsis:  A string
Network.
next-hop Synopsis:  A string
Next-hop address.
selected Synopsis:  { true, false }
Selected next-hop for this route.
internal Synopsis:  { true, false }
Internal route.
metric Synopsis:  A 32-bit signed integer
Metric value.
local-preference Synopsis:  A string
Local preference.
weight Synopsis:  A 32-bit signed integer
Weight.
as-path Synopsis:  A string
Path.
origin Synopsis:  A string
Origin.
If no dynamic BGP routes have been configured, configure BGP and add routes as needed. For more information
about configuring BGP, refer to Section13.8.1, “Configuring BGP”.