Contents
x
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
DLP- G237 Change Distance Extension Settings for MXP_MR_2.5G and MXPP_MR_2.5G
Cards
5-69
DLP- G238 Change OC-48/STM-16 Settings for MXP_MR_2.5G and MXPP_MR_2.5G Cards 5-71
DLP- G239 Change Section Trace Settings for MXP_MR_2.5G and MXPP_MR_2.5G Cards 5-73
DLP- G240 Change MXP_MR_2.5G and MXPP_MR_2.5G Card Line Threshold Settings for SONET or
SDH Payloads
5-74
DLP- G321 Change the MXP_MR_2.5G or MXPP_MR_2.5G Card Line Thresholds for 1G Ethernet or
1G FC/FICON Payloads
5-77
DLP- G307 Provision the MXP_MR_2.5G and MXPP_MR_2.5G Trunk Port Alarm and TCA
Thresholds
5-79
DLP- G308 Provision the MXP_MR_2.5G and MXPP_MR_2.5G Client Port Alarm and TCA
Thresholds
5-80
CHAPTER
6 Turn Up Network 6-1
Before You Begin 6-1
NTP- G51 Verify DWDM Node Turn-Up 6-2
NTP- G52 Verify Node-to-Node Connections 6-3
NTP- G53 Set Up Timing 6-4
DLP- G95 Set Up External or Line Timing 6-4
DLP- G96 Set Up Internal Timing 6-7
NTP- G54 Provision and Verify a DWDM Network 6-8
DLP- G99 Create a Provisionable Patchcord 6-11
NTP- G56 Verify the OSNR 6-12
NTP- G142 Perform a Protection Switch Test 6-13
NTP- G57 Create a Logical Network Map 6-15
CHAPTER
7 Create Channels and Circuits 7-1
Before You Begin 7-1
NTP- G58 Locate and View Optical Channel Network Connections 7-2
DLP- G100 Search for Optical Channel Network Connections 7-2
DLP- G101 View Optical Channel Network Connection Information 7-3
DLP- G102 Filter the Display of Optical Channel Network Connections 7-7
DLP- G103 View Optical Channel Network Connections on a Span 7-8
NTP- G59 Create and Delete Optical Channel Network Connections 7-9
DLP- G104 Assign a Name to a Port 7-10
DLP- G105 Provision DWDM Optical Channel Network Connections 7-10
DLP- G106 Delete Optical Channel Network Connections 7-12
NTP- G60 Create Overhead Circuits 7-13
DLP- G76 Provision GCC Terminations 7-14
To Next Page
Loading...
Need help?
General
