Cisco ONS 15454 DWDM User Manual

Contents
ix
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
DLP- G216 Change Card Settings for TXP_MR_10G and TXP_MR_10E Cards 5-13
DLP- G217 Change Line Settings for TXP_MR_10G and TXP_MR_10E Cards 5-14
DLP- G218 Change Section Trace Settings for the TXP_MR_10G and TXP_MR_10E Cards 5-17
DLP- G219 Change the TXP_MR_10G or TXP_MR_10E Card Line Thresholds for SONET or SDH
Payloads
5-19
DLP- G319 Change the TXP_MR_10G or TXP_MR_10E Card Line Thresholds for 10G Ethernet LAN
Phy
5-21
DLP- G301 Provision the TXP_MR_10G and TXP_MR_10E Trunk Port Alarm and TCA
Thresholds
5-24
DLP- G302 Provision the TXP_MR_10G and TXP_MR_10E Client Port Alarm and TCA
Thresholds
5-25
DLP- G221 Change OTN Settings for TXP_MR_10G and TXP_MR_10E Cards 5-27
NTP- G97 Modify Line Settings and PM Parameter Thresholds for MXP_2.5G_10G and MXP_2.5G_10E
Cards
5-31
DLP- G222 Change Card Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards 5-32
DLP- G223 Change Line Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards 5-34
DLP- G224 Change Section Trace Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards 5-36
DLP- G225 Change Trunk Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards 5-38
DLP- G226 Change Line Thresholds Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards 5-39
DLP- G303 Provision the MXP_2.5G_10G and MXP_2.5G_10E Trunk Port Alarm and TCA
Thresholds
5-41
DLP- G304 Provision the MXP_2.5G_10G and MXP_2.5G_10E Client Port Alarm and TCA
Thresholds
5-43
DLP- G228 Change Line OTN Settings for MXP_2.5G_10G and MXP_2.5G_10E Cards 5-44
NTP- G98 Modify Line Settings and PM Parameter Thresholds for TXP_MR_2.5G and TXPP_MR_2.5G
Cards
5-48
DLP- G229 Change Card Settings for TXP_MR_2.5G and TXPP_MR_2.5G Cards 5-49
DLP- G230 Change Line Settings for TXP_MR_2.5G and TXPP_MR_2.5G Cards 5-50
DLP- G231 Change Section Trace Settings for TXP_MR_2.5G and TXPP_MR_2.5G Cards 5-53
DLP- G232 Change TXP_MR_2.5G and TXPP_MR_2.5G Cards Line Threshold Settings for SONET or
SDH Payloads
5-54
DLP- G320 Change the TXP_MR_2.5G or TXPP_MR_2.5G Card Line Thresholds for 1G Ethernet or 1G
FC/FICON Payloads
5-56
DLP- G305 Provision the TXP_MR_2.5G and TXPP_MR_2.5G Trunk Port Alarm and TCA
Thresholds
5-57
DLP- G306 Provision the TXP_MR_2.5G and TXPP_MR_2.5G Cards Client Port Alarm and TCA
Thresholds
5-58
DLP- G234 Change OTN Settings for TXP_MR_2.5G and TXPP_MR_2.5G Cards 5-62
NTP- G99 Modify Line Settings and PM Parameter Thresholds for MXP_MR_2.5G and MXPP_MR_2.5G
Cards
5-65
DLP- G235 Change Card Settings for MXP_MR_2.5G and MXPP_MR_2.5G Cards 5-66
DLP- G236 Change Client Line Settings for MXP_MR_2.5G and MXPP_MR_2.5G Cards 5-67

Cisco ONS 15454 DWDM Specifications

General

Chassis Type	DWDM
Form Factor	Rack-mountable
Slots	17
Storage Temperature	-40 to 158°F (-40 to 70°C)
Relative Humidity	5% to 95% non-condensing
Power Supply	AC or DC
Cooling	Internal fans
Operating Temperature	23 to 104°F (-5 to 40°C)
Altitude	0 to 6500 ft (0 to 1981 m)
Safety Compliance	EN 60950-1
EMI Compliance	FCC Part 15