Contents
xiii
Cisco ONS 15454 DWDM Installation and Operations Guide, R6.0
August 2005
DLP- G158 Enable Automatic Power Control 10-4
DLP- G159 Refresh Automatic Power Control Information 10-5
NTP- G78 View ROADM Node Power Equalization 10-5
NTP- G80 Change Node Management Information 10-6
DLP- G160 Change the Node Name, Date, Time, and Contact Information 10-7
DLP- G161 Change the Login Legal Disclaimer 10-8
NTP- G134 Modify OSI Provisioning 10-9
DLP- G284 Modify the TARP Operating Parameters 10-10
DLP- G285 Add a Static TID to NSAP Entry to the TARP Data Cache 10-12
DLP- G286 Remove a Static TID to NSAP Entry from the TARP Data Cache 10-12
DLP- G287 Add a TARP Manual Adjacency Table Entry 10-13
DLP- G292 Remove a TARP Manual Adjacency Table Entry 10-13
DLP- G293 Change the OSI Routing Mode 10-14
DLP- G294 Edit the OSI Router Configuration 10-15
DLP- G295 Edit the OSI Subnetwork Point of Attachment 10-16
DLP- G296 Edit an IP-Over-CLNS Tunnel 10-17
DLP- G297 Delete an IP-Over-CLNS Tunnel 10-18
NTP- G81 Change CTC Network Access 10-18
DLP- G162 Change IP Settings 10-19
DLP- G265 Lock Node Security 10-20
DLP- G266 Modify Backplane Port IP Settings 10-21
DLP- G267 Disable Node Security Mode 10-22
DLP- G163 Modify a Static Route 10-23
DLP- G164 Delete a Static Route 10-24
DLP- G165 Disable OSPF 10-24
DLP- G166 Delete a Proxy Tunnel 10-25
DLP- G167 Delete a Firewall Tunnel 10-25
NTP- G82 Customize the CTC Network View 10-26
DLP- G168 Change the Network View Background Color 10-26
DLP- G169 Change the Default Network View Background Map 10-27
DLP- G170 Apply a Custom Network View Background Map 10-28
DLP- G171 Create Domain Icons 10-28
DLP- G172 Manage Domain Icons 10-29
DLP- G173 Enable Dialog Box Do-Not-Display Option 10-30
DLP- G174 Switch Between TDM and DWDM Network Views 10-31
NTP- G83 Modify or Delete Card Protection Settings 10-31
DLP- G175 Modify a Y-Cable Protection Group 10-32
DLP- G176 Modify a Splitter Protection Group 10-33
DLP- G177 Delete a Y-Cable Protection Group 10-33
To Next Page
Loading...
