Lanier Copier System Edition - Advanced Features; SUB Code

Operating InstructionsFacsimile Reference (option) <Advanced Features>
76
Advanced Features
SUB Code
Normally you can only use Confidential Trans-
mission to send messages to fax machines of the
same make that have the Confidential Reception
feature. ⇒ p.19 “Confidential Transmission”
However, if the other machine supports a similar
feature called “SUB Code”, you can send fax
messages to the other party using this method in-
stead.
Limitation
❒ You can only use this feature with a G3 line
(not with G4).
❒ You cannot use Chain Dial with this feature.⇒
p.73 “Chain Dial”
❒ You cannot select this function when carrying
out standard Confidential Transmission.
Note
❒ The ID can be up to 20 digits long and consist
of numbers, spaces, * and # .
❒ Make sure the number of digits in the ID
matches the specification of the machine to
which you are sending.
❒ You can store IDs in Quick Dials, Groups and
Programs. ⇒ Chapter 3, “Quick Dial”,
“Groups” in the Basic Features manual and,
⇒ p.153 “Registering and Changing Key-
stroke Programs”
❒ Messages you send using this feature are
marked “SUB” on all reports.⇒ p.187 “Re-
ports/Lists”
A
AA
A
Place your original, and then select any
scan settings you require.
B
BB
B
Dial the fax number using the number
keys.
C
CC
C
Press [Adv. Features].
The advanced feature menu is shown.