Lanier Copier System Edition - Multi-Access

Multi-Access
47
4
Multi-Access
You can carry out another job using a different function while the current job is
being performed.
This allows you to handle your jobs efficiently regardless of how the machine is
being used. For example:
• While making copies, you can scan documents to store in the Document Serv-
er.
• While printing documents saved in the Document Server, the machine can re-
ceive print data.
• You can make copies while receiving fax data.
• While printing print data, you can make operations for copying.
Performing multiple functions simultaneously like this is called Multi-accessing.
Note
❒ To specify which function to give priority to, use [Print Priority]. The factory
setting is [Copy]. For more information, see "User Tools (System Settings)" in
Administrator Reference 2 Copier System Edition.
❒ If the optional SR770 (2 Tray Finisher) or PT460 (Multi-bin) is installed on the
machine, you can specify an output tray to which to deliver documents. For
more information, see "User Tools (System Settings)" in Administrator Refer-
ence 2 Copier System Edition.
-
--
-Multi-Access Operation
: If the desired operation is set as "Function Priority", it interrupts the current
operation after the current page has been completed. If the current operation is
set as "Function Priority", the interrupting operation is carried out automatically
after the current operation ends.
: If the desired operation is set as "Function Priority", it interrupts the current
operation after the current job has been completed. If the current operation is set
as "Function Priority", the interrupting operation is carried out automatically af-
ter the current operation ends.
: Operation is enabled when a function key or the {
{{
{Interrupt}
}}
} key is pressed, or
remote switching (when scanning) is carried out.
U: The operation is enabled by pressing the {
{{
{Interrupt}
}}
} key to interrupt the cur-
rent operation.