42
Operating Instructions Administrator Reference 2
3. NetWare Configuration
This chapter describes how to configure the printer to use as a print server or a remote printer in a Net-
Ware environment.
Note
❒ NetWare must be set to active using the operation panel of the printer. For more information about
how to set it, see Administrator Reference 1 that comes with this printer.
❖
❖❖
❖ SmartNetMonitor for Admin
To use a printer in a NetWare environment, configure the NetWare printing environment by using
SmartNetMonitor for Admin.
Note
❒ If you configure NetWare printing environment by using SmartNetMonitor for Admin under fol-
lowing environment, NetWare Client which is provided by Novell is required.
• NDS mode in Windows 95/98
• NDS or Bindary mode in Windows 2000/Windows NT4.0
❖
❖❖
❖ Printers listed by SmartNetMonitor for Admin
SmartNetMonitor for Admin displays a list of printers, which are connected to the network.
If you cannot find out the printer from the displayed list, refer to the configuration page printed from
the printer. For more information about printing a configuration page, see p.161 “Printing a Config-
uration Page”.
To Next Page
Loading...
