Operating Instructions Scanner Reference
44
For information about the outline of the software that can be installed by Auto Run, see p.48 “Software
Supplied on CD-ROM”.
Software for using a Network TWAIN Scanner
To use the machine as a network TWAIN scanner, it is essential to install the TWAIN driver.
If you do not have applications that work with TWAIN, it is necessary to also install the DeskTopBind-
er V2 Lite. For information about the installation of DeskTopBinder V2 Lite, see p.47 “DeskTopBinder
V2 Lite”.
Preparation
❒ Before installing, check the operating environment for the TWAIN driver.⇒ p.48 “Type3800C
TWAIN Driver”
Using Windows 95/98/Me, Windows 2000, or Windows NT 4.0
Install the TWAIN driver using Auto Run. Here, Windows 98 is used as an example for explanation.
The basic operations are similar for Windows 95/Me, Windows 2000, and Windows NT 4.0.
A
AA
A
Verify that Windows is running. Insert the supplied CD-ROM labeled "Scanner Driver &
Document Management Utilities" into the CD-ROM drive of the computer.
The choose setup language screen appears.
Reference
❒ If the installer does not start automatically, see p.42 “Auto Run Program”.
B
BB
B
Select a setup language, and then click [OK].
The CD-ROM Launcher screen appears.
To Next Page
Loading...
