Getting Started
22
2
Configuring the Network
Configuring the Network
Preparation
This section describes the network configuration using the control panel of
the machine. Make the necessary settings for the functions you use.
*1
To use this function, the following are required:
• Scanner unit
• Scan Router V2 Professional (option)
*2
To use this function, the following are required:
• Scanner unit
• Scan Router V2 Lite (packaged with this machine) or Scan Router V2 Professional
(option)
*3
Make the necessary settings for your network environment. For more information
about settings, see p.23 “Configuring the Network with the Control Panel”.
*4
Configure the TCP/IP when you use Pure IP of NetWare 5/5.1.
This section describes the basic operation procedure. For more information
about the settings, see "Interface Settings/Network" in Administrator Reference 2
Copier System Edition.
For a network environment that uses TCP/IP, you can use SmartNetMonitor for
Admin (packed with this machine) or the Web browser to configure IP address-
es.
Mode Network Setting
Distribute received fax
documents
*1
IP Address, Subnet Mask, Gateway Address, Delivery Server IP
Address, Fax RX File Transmission, Effective Protocol (TCP/IP)
Scanner
(Network Twain Scanner)
IP Address, Subnet Mask, Gateway Address, Effective Protocol
(TCP/IP)
Scanner (Network Deliv-
ery Scanner)
*2
IP Address, Subnet Mask, Gateway Address, Effective Protocol
(TCP/IP), Delivery Server IP Address, Number of Recalls, Recall
Interval time
Printer (TCP/IP)
*3
IP Address, Subnet Mask, Gateway Address, Network Boot, Effec-
tive Protocol
Printer (NetWare)
*3
*4
Effective Protocol, NW Frame Type
To Next Page
Loading...
