Operating Instructions Administrator Reference 2
174
Host Interface Menu
There are 2 menu items in the "Host Interface" menu.
• I/O Buffer
• I/O Timeout
Host Interface Parameters
Menu Description
I/O Buffer You can set the size of the I/O Buffer. Normally it is not necessary to change this
setting.
128 KB, 256 KB, 512 KB
Note
❒ Default: 128 KB
I/O Timeout You can set how many seconds the printer should wait before ending a print job.
If data from other port often appears in the middle of the print job, you should
increase the timeout value.
10 seconds, 15 seconds, 20 seconds, 25 seconds, 60 seconds
Note
❒ Default: 15 seconds
To Next Page
Loading...
