Lanier Copier System Edition - Key Operator Tools

Operating Instructions Administrator Reference 2
122
Key Operator Tools
If an access code has been set, you cannot use the Key Operator Tools unless you enter the access code
(max. 8 digits). ⇒ p.123 “Key Operator Code”
Reference
For details about user codes, ⇒ p.127 “User Code”
❖
❖❖
❖ User Code Management
Allows you to control who uses the machine by setting user codes for users.
To use function selected with "User Code Management", you must enter a registered user code. User
codes must be registered for user code management. For more information about user codes, see
p.127 “User Code”.
Note
❒ You can select following functions and modes;
• Copier
Full color, Black & White, Single Color, Tow-color
• Printer
PC Control: ON, PC Control: OFF, Color
*1
, Black & White
*1
*1
Selectable when PC Control: OFF is selected.
• Others
Document Server, Facsimile, Scanner