Lanier Copier System Edition - Mixing Scan Settings for a Multiple; When Placing Originals in the Optional Document Feeder (ADF); When Placing Originals on the Exposure Glass

Faxing
38
2
Mixing Scan Settings for a
Multiple Page Original
When sending an original consisting
of several pages, you can select differ-
ent image density, resolution and
original type settings for each page.
Place your original, select the scan
settings for the first page, dial and
press the {
{{
{Start}
}}
} key as you would
normally. Then follow one of the fol-
lowing two procedures.
Note
❒ It is recommended that originals
are placed on the exposure glass
when mixing scan settings for a
multiple page original.
When placing originals on the exposure
glass
While the machine is beeping, you
have about 60 seconds (10 for Imme-
diate Transmission) to select density,
resolution and original type. The re-
maining time is shown on the display.
A
AA
A
Check which pages you wish to
scan with different settings.
B
BB
B
Remove the previous page and
place the next page.
C
CC
C
Select the image density, resolu-
tion and original type.
Note
❒ Adjust settings for each page
before you press the {
{{
{Start}
}}
} key.
When placing originals in the optional
Document Feeder (ADF)
A
AA
A
Check which pages you wish to
scan with different settings.
B
BB
B
Select the image density, resolu-
tion and original type before the
next page is scanned.