Lanier Copier System Edition - When Memory Is Full

Operating Instructions Copy Reference <Advanced Features>
83
When Memory Is Full
Limitation
❒ If memory is full, Interrupt Copy will not be available.
Note
❒ If you set “Memory Full Auto Scan Restart” of the User Tools to “Yes”, the memory overflow mes-
sage will not be displayed, but make Connect Copy for the scanned original automatically. Connect
Copy continues scanning and copying until finishing the job. Note that copy sets will be printed out
separately by scanning at this time.
Message Cause Solution & Reference
Memory is full.*originals have been
scanned.
Press [Print] to copy scanned origi-
nals. Do not remove remaining origi-
nals.
Note
❒ Copying will stop and this
message will be displayed
when the memory is full.
The scanned original exceeds the
number of pages that can be stored in
memory.
Press [
Print
] to copy scanned origi-
nals and clear the scanning data.
Press [
Clear
] to clear the scanning
data and not copy.
Press [Continue] to scan and copy re-
maining originals.
[
Stop
] [
Continue
]
The machine checks if the remaining
original should be copied, after the
scanned original has been printed.
To continue copying, remove all cop-
ies then press [
Continue
]. To stop
copying, press [
Stop
].