Faxing
18
2
Placing Originals in the Optional
Document Feeder (ADF)
Use the optional Document Feeder
(ADF) to scan in a stack of originals in
one operation. The optional Docu-
ment Feeder (ADF) can handle both
single-sided and double-sided origi-
nals.
Limitation
❒ The maximum document length is
1,200mm (47"). Documents longer
than 420mm (17") must be sent by
Memory Transmission (Immediate
Transmisson is not possible).
❒ You cannot place originals in the
optional Document Feeder (ADF)
one page at a time, or sprit a stack
of originals and place the groups of
pages successively.
❒ Do not open the optional Docu-
ment Feeder (ADF) while it is scan-
ning the originals or a document
could become jammed.
Note
❒ If you send documents longer than
420mm (17"), select Long Docu-
ment mode with the User Parame-
ters. If a jam occurs, the document
might get damaged because scan-
ning will not stop. ⇒ p.19 “Setting
a Scan Area” ⇒ Chapter 8,
“Changing the User Parame-
ters”(Switch14, Bit0) in the Ad-
vanced Features manual
❒ If an original jams, press the
{
{{
{Clear/Stop}
}}
} key, and then remove
the original carefully.
❒ If your original is bent or folded,
flatten or straighten it out before
you place it.
❒ Place thin originals on the expo-
sure glass.
Reference
For information about the sizes
and number of originals that can
be placed in the optional Docu-
ment Feeder (ADF), ⇒ Appendix,
“Acceptable Types of Originals” in
the Advanced Features manual
A
AA
A
Adjust the document guide to
match the size of your originals.
Align the edges of your originals
and stack them in the optional
Document Feeder (ADF) face up.
1. Limit mark
2. Document guide
Originals unsuitable for the optional
Document Feeder (ADF)
Do not place the following types of
originals in the optional Document
Feeder (ADF) because they may be
damaged. Place them on the exposure
glass instead.
• Originals containing staples or
clips
• Perforated or torn originals
• Curled, folded, or creased origi-
nals
• Pasted originals
• Originals with any kind of coating,
such as thermosensitive paper, art
paper, aluminum foil, carbon pa-
per, or conductive paper
To Next Page
Loading...
