Operating InstructionsFacsimile Reference (option) <Advanced Features>
122
More Transmission Functions
If Memory Runs Out While Storing
an Original
If you run out of memory while storing an origi-
nal (free space reaches 0%), “
Memory is
full. Cannot scan more. Transmis-
sion will be stopped.
” is displayed.
Press [Exit] to transmit the stored pages only.
Note
❒ Successfully scanned pages are sent. If you
wish to change this setting, please contact
your service representative.
❒ Standard Memory Transmission may be used
instead of Parallel Memory Transmission de-
pending the optional equipment installed if
there is not enough free memory left.
Parallel Memory Transmission
This function dials while the original is being
scanned. Standard Memory Transmission stores
the original in memory, then dials the destination.
Parallel Memory Transmission allows you to
quickly determine whether a connection was
made. In addition, this function scans the original
faster than Immediate Transmission. This is use-
ful when you are in a hurry and need to use the
original for another purpose.
Note
❒ You can turn this function on or off with the
User Parameters. ⇒ p.216 “Changing the
User Parameters” (Switch07, Bit2)
❒ If you use this function, the Memory Storage
Report will not be printed.
To Next Page
Loading...
