vii
TABLE OF CONTENTS
1.Getting Started
Guide to Components................................................................................ 1
Front View ...................................................................................................... 1
Side View ....................................................................................................... 2
Control Panel .............................................................................................. 3
Starting the Machine .................................................................................. 5
Turning On the Power .................................................................................... 5
Turning Off the Power .................................................................................... 6
Turning Off the Main Power Switch ............................................................. 7
Changing Modes......................................................................................... 8
Reading the Display ................................................................................... 9
Reading the Display Panel and Using Keys................................................. 10
Standby Display ........................................................................................... 12
Communication Display ............................................................................... 13
Display Prompts ........................................................................................... 14
2.Faxing
Transmission Modes................................................................................ 15
Switching Memory Transmission and Immediate Transmission .................. 15
Placing Originals ...................................................................................... 16
Placing a Single Original on the Exposure Glass......................................... 17
Placing Originals in the Optional Document Feeder (ADF).......................... 18
Originals unsuitable for the optional Document Feeder (ADF) .................. 18
Setting a Scan Area ..................................................................................... 19
If the Machine Cannot Detect the Size of Your Original ............................ 21
Original Sizes Difficult to Detect ................................................................ 22
Memory Transmission ............................................................................. 23
Canceling a Memory Transmission ........................................................ 27
Canceling the Transmission Before the Original is Scanned ....................... 27
Canceling a Transmission While the Original is Being Scanned ................. 27
Canceling a Transmission While the Message is Being Sent ...................... 27
Canceling a transmission using [Change/Stop TX File]................................. 27
Canceling a transmission using the {Clear/Stop} key ................................. 28
Immediate Transmission ......................................................................... 30
Canceling an Immediate Transmission.................................................. 33
Canceling a Transmission Before You Have Pressed the Start Key ........... 33
Canceling a Transmission After You Have Pressed the Start Key .............. 33
To Next Page
Loading...
