Operating Instructions Maintenance Guide 2 Copier System Edition
7
Non-recommended originals for the document feeder
Placing the following types of originals in the document feeder can cause paper misfeeds or result in
damage to the originals. Place these originals on the exposure glass instead.
• Originals other than those specified in ⇒ p.6 “Sizes and Weights of Recommended Originals”
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon pa-
per, or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
• Sticky originals such as translucent paper
• Thin originals that have low stiffness
• Thick originals such as postcards
• Originals of inappropriate weight
• Bound originals such as books
• Transparent originals such as OHP transparencies or translucent paper
• Originals that have correction fluid or ink on them that has not completely dried
To Next Page
Loading...
