Lanier Copier System Edition - Sender Stamp; Label Insertion; Reduced Image Transmission

Operating InstructionsFacsimile Reference (option) <Advanced Features>
116
Note
❒ In the USA, law requires that your fax number
be included in the Fax Header. Register the
fax number and switch on with “Gen. Set-
tings/Adjust”. ⇒ p.189
-
--
-Label Insertion
With this feature you can have the receiver's
name printed on the message when it is received
at the other end. The name will be printed at the
top of the page and will be preceded by “To”.
Limitation
❒ When there is an image around the area
where the Label is to be printed, that image is
deleted.
❒ You can switch this feature on and off with
“Gen. Settings/Adjust”.
-
--
-Sender Stamp
When there is data, such as the User Name and
department name, programmed into the User
Code, you can have the machine print a sender
stamp on the right edge of your paper.
Note
❒ Enter the User Name in System Settings.
❒ You can switch this feature on and off with
“Gen. Settings/Adjust”.
-
--
-Reduced Image Transmission
Using this feature, your message is sent at a re-
duced size (93%) with a blank margin on the left.
Limitation
❒ This feature is not available with Immediate
Transmission or a specified transmission of a
stored document.
❒ Image Rotation is not available with this fea-
ture.
❒ You can switch this feature on and off with
“Gen. Settings/Adjust”.