Operating Instructions Scanner Reference
35
G
GG
G
Press [Exit].
The display returns to the Scanner Features
screen.
H
HH
H
Press [Exit].
The main menu is shown again.
Making Scanner Settings
This section explains how to switch from net-
work TWAIN scanner mode to network delivery
scanner or Document Server mode, and how to
set the compression of image data and initial val-
ues for setting originals.
The scanner settings consist of the following. For
the list about settings and factory defaults, see
p.28 “Scanner settings”.
❖
❖❖
❖ Function Priority
Select "Delivery/Store" or "TWAIN" to deter-
mine whether the network TWAIN scanner
mode, network delivery scanner mode, or
Document Server mode is initially active
when the scanner function is selected by
pressing the {
{{
{Scanner}
}}
} key on the control
panel.
Note
❒ When "TWAIN" is selected, the network
TWAIN scanner mode is set. By pressing
[Cancel] in this condition, you can switch to
network delivery scanner operation or
Document Server operation.
❒ When "Delivery/Store" is selected, the net-
work delivery scanner mode or the Docu-
ment Server mode is set. It is not possible
to switch network TWAIN scanner opera-
tion from these modes. To use the ma-
chine as a network TWAIN scanner,
access the machine from a client compu-
ter using the TWAIN driver.
❖
❖❖
❖ Delivery/Store Connection Time out
When using the machine as a network delivery
scanner or Document Server, scanning request to
the machine as a TWAIN scanner will switch the
machine to the network TWAIN scanner mode.
This setting determines the delay until the ma-
chine switches to network TWAIN scanner mode.
• Selecting "Immediate" causes the network
TWAIN scanner mode to be activated at once.
• When you select "Yes", you can enter the
delay time with the number keys (3 - 30
seconds). When the TWAIN scanner
mode is activated, only the time specified
here passes from the last key operation.
To Next Page
Loading...
