Operating Instructions Scanner Reference
36
❖
❖❖
❖ Compression (Black & White)
This setting determines whether image data
read with the 2-value (black-and-white) set-
ting is to be compressed. Compression reduc-
es the time required for transferring the scan
data to the computer.
Note
❒ The actual time required for data transfer
will vary, depending on the data size and
network load.
❖
❖❖
❖ Compression (Gray Scale/Full Color)
This setting determines to what extent image
data read with the multi-value (gray-scale) or
full color setting is to be compressed. You can
select [Standard ], [High ], [Low], or [Off].
Note
❒ Compression ratio decreases in the order
[High ], [Standard ], [Low], [Off], and the time
required for data transfer increases ac-
cordingly.
❒ The actual time required for data transfer
will vary, depending on the data size and
network load.
❖
❖❖
❖ Delivery Option
This setting determines whether the machine
is used as a network delivery scanner.
When the "Delivery Option" setting is
[On]"On", make sure that "Delivery IP Ad-
dress" in System Settings is set.
❖
❖❖
❖ Original Setting
Set the initial value for original type and ori-
entation. When the original is always similar,
selecting this as the default makes operation
easier. You can select "1 Sided Original", "2
Sided Orig.: T to T" (Top to Top), "2 Sided
Orig.: T to B" (Top to Bottom).
Reference
❒ ⇒ p.60 “Original Orientation and Scan
Area Setting”
❖
❖❖
❖ Original Orientation Priority
Select the initial value for original placement
orientation. When the original is always posi-
tioned in the same way, selecting this as the
default makes operation easier.
Reference
❒ ⇒ p.60 “Original Orientation and Scan
Area Setting”
To Next Page
Loading...
