Lanier Copier System Edition - Polling Reserve Report; Polling Result Report

Operating InstructionsFacsimile Reference (option) <Advanced Features>
29
D
DD
D
Press [OK].
The Transmission Mode menu is shown. The
[Polling RX] key is highlighted, and the speci-
fied mode is shown.
E
EE
E
Press [OK].
The initial display is shown.
F
FF
F
Dial, and then press the {
{{
{Start}
}}
} key.
Polling Reserve Report
This report is printed after Polling Reception has
been set up.
Note
❒ You can turn this function on or off with the
User Parameters. ⇒ p.216 “Changing the
User Parameters” (Switch03, Bit3)
Polling Result Report
This report is printed after a Polling Reception
has been completed and shows its result.
Note
❒ You can also check the result of a Polling Re-
ception with the Journal.⇒ p.45 “Printing the
Journal”
❒ You can turn this function on or off with the
User Parameters. ⇒ p.216 “Changing the
User Parameters” (Switch03, Bit4)