Lanier Copier System Edition - Reading the Display

Reading the Display
9
1
Reading the Display
The display tells you the machine status, messages and guides you through op-
erations.
Important
❒ Do not apply a strong shock or force of about 30 N (about 3 kgf) or more to
the display panel. If you do, the display can be damaged.
Note
❒ Functions that have been selected are highlighted (for example ).
Keys that you cannot select are shown with a dashed outline (for example
).
❒ All procedures in this manual assume you are in Facsimile mode. If the ma-
chine is not in Facsimile mode, press the {
{{
{Facsimile}
}}
} key to change to Facsim-
ile mode. You can have the machine start in Facsimile mode. ⇒ “General
Features
1
/
2
-- Function Priority” in Administrator Reference 2 Copier System
Edition
❒ This machine automatically returns to the standby mode if you do not use the
machine for a certain period of time. You can select the period in Fax Reset
Timer. ⇒ “Timer Setting -- Facsimile Auto Reset Timer” in Administrator
Reference 2 Copier System Edition