Operating Instructions Administrator Reference 2
215
Getting Printer Information over the Network
Printer current status
You can check the printer's status using the telnet command.
❖
❖❖
❖ telnet
Use the status command.
Messages Description Comments
Call Service Center There is a malfunction in the printer. Turn the printer off and on.
Call Service Center: SC***-* An error has occurred in the printer. First, turn the power switch off and
then on. If the message appears again,
call your sales or service representa-
tive.
Cover Open: Duplex Unit The cover of the optional Duplex
Unit is open.
Close the cover of the optional Du-
plex Unit.
Cover Open: Front Cover Close the front cover. Close the front cover.
Cover Open: Mailbox The cover of the Mailbox is open. Close the cover of the Mailbox cover.
Empty: Black Toner The toner cartridge is empty. Replace the new toner cartridge.
Empty: Cyan Toner The toner cartridge is empty. Replace the new toner cartridge.
Empty: Magenta Toner The toner cartridge is empty. Replace the new toner cartridge.
Empty: Yellow Toner The toner cartridge is empty. Replace the new toner cartridge.
Energy Saver Mode The printer is in Energy Save Mode. Wait for a while.
To Next Page
Loading...
