Cleaning the Cover
35
2
Cleaning the Cover
If the exposure glass cover or docu-
ment feeder sheet is dirty, you might
not be able to make copies or scan as
you want. If they are dirty, clean
them.
❖
❖❖
❖ Cleaning the machine
Wipe the machine with a soft,
damp cloth. Then, wipe it with a
dry cloth to remove the water.
Important
❒ Do not use chemical cleaner or or-
ganic solvent, such as thinner or
benzene. If they get into the ma-
chine or melt plastic parts, a failure
might occur.
❒ Do not clean parts other than those
specified in this manual. Such
parts should be cleaned by your
service representative.
When using the document
feeder
Clean 1 and 2.
When using the exposure
glass cover
To Next Page
Loading...
