Operating InstructionsFacsimile Reference (option) <Advanced Features>
22
Polling Transmission
Use Polling Transmission when you want to
leave an original in the machine's memory for
others to pick up. The message will be sent when
the other party calls you up.
There are three types of Polling Transmission.
❖
❖❖
❖ Free Polling Transmission
It is not necessary to enter the Polling ID dur-
ing the procedure.
Anybody can poll the message from your ma-
chine. The machine sends it regardless of
whether Polling ID's match.
❖
❖❖
❖ Default ID Transmission
It is not necessary to enter the Polling ID dur-
ing the procedure.
The message will only be sent if the Polling
ID of the machine trying to poll your message
is the same as the Polling ID stored in your
machine. Make sure that both machines' Poll-
ing IDs are identical in advance.
❖
❖❖
❖ ID Override Transmission
You must enter an Override Polling ID unique
to this transmission. This ID overrides that
stored in the Polling ID. The user must supply
this ID when they poll your machine. If the IDs
match, the message is sent. Make sure the other
end knows the ID you are using in advance.
Limitation
❒
Polling Transmission is allowed only if the receiv-
er's machine has the Polling Reception feature.
❒ Usually, only machines of the same make that
support Polling Reception can perform ID
Polling Transmission. However, when the In-
formation Box File functions is used, and the
other party's fax machine supports Polling
Transmission and the “SEP” feature, you can
still carry out a Polling Transmission with an
ID. ⇒ p.64 “Information Boxes”
To Next Page
Loading...
