Lanier Copier System Edition - Reception; Selecting the Reception Mode; Auto Reception; Manual Reception

Faxing
44
2
Reception
Selecting the Reception Mode
There are two ways you can set up
your machine to handle incoming
calls:
• Manual Reception (optional exter-
nal telephone or optional Handset
is required)
• Auto Reception
Manual Reception
When a telephone call comes in, the
machine rings. If the call is a fax mes-
sage, you must manually change to
facsimile mode.
Auto Reception
When a telephone call comes in, the
machine automatically receives it as a
fax message. Use this setting for a
dedicated fax line.
Limitation
❒ You cannot select the reception
mode when the optional Extra G3
Interface Unit is installed.
❒ The optional external telephone or
optional Handset is required to use
this machine as a telephone.
❒ You cannot select the reception
mode when you use an ISDN line.
-
--
-Receiving a Fax in Manual
Reception Mode
A
When the machine rings, pick up
the handset of the external tele-
phone.
B
If you hear beeps, press the {
{{
{Start}
}}
}
key or the {
{{
{Start Manual RX}
}}
} key.
(The {
{{
{Start}
}}
} key is available in the
facsimile mode when an original is
not placed only.)
C
Replace the handset of the external
telephone. The machine will start
receiving.