Operating Instructions Maintenance Guide 2 Copier System Edition
23
Paper Recommendations
Loading Paper
Important
❒ Do not use paper that is meant for an ink-jet printer or it may stick to the Fusing Unit and cause a
paper misfeed.
❒ When printing on an OHP transparency that has a print side, load it with the print side up on the
Bypass Tray. Not taking this precaution may cause it to stick to the Fusing Unit and cause a misfeed.
❒ Print quality cannot be guaranteed if recommended paper is not used. For details about recom-
mended paper, contact your sales or service representative.
❒ Do not use paper that has already been printed onto by other printers.
Storing Paper
• Paper should always be stored properly. Improperly stored paper might result in poor print quality,
paper misfeeds, or printer damage. Recommendations are as follows:
• Avoid storing paper in humid areas.
• Avoid exposing paper to direct sunlight.
• Store on a flat surface.
• Keep open reams of paper in the package in which the paper came.
To Next Page
Loading...
