Operating InstructionsFacsimile Reference (option) <Advanced Features>
128
Communication Failure Report
This report is only printed if the Transmission
Result Report is turned off and a message could
not be successfully transmitted with Memory
Transmission. Use it to keep a record of failed
transmissions so you can send them again.
Note
❒ You can choose whether to include part of the
original image on the report. ⇒ p.216 “Chang-
ing the User Parameters” (Switch04, Bit7)
❒ The “Page” column gives the total number of
pages. The “Not Sent” column gives the num-
ber of pages that could not be sent success-
fully.
Transmission Result Report
(Immediate Transmission)
If you turn this report on, a report will be printed
after every Immediate Transmission so you have
a record of whether the transmission was suc-
cessful or not. If the machine is set up not to print
this report and the fax message could not be suc-
cessfully transmitted, the Error Report is printed
instead.
Note
❒ You can switch this report on or off in the User
Parameters. ⇒ p.216 “Changing the User Pa-
rameters” (Switch03, Bit5)
❒ If the page was sent successfully, the “Page”
column gives the total number of pages that
was sent successfully. The “Not Sent” column
gives the number of pages that could not be
sent successfully.
To Next Page
Loading...
