Operating Instructions Copy Reference <Advanced Features>
25
Erase
This function erases the center and/or all four
sides of the original image. This is useful for
avoiding edge margins on the copy image caused
by bound originals, such as books.
This function has the following three types:
❖
❖❖
❖ Border
This mode erases the edge margin of the orig-
inal image.
❖
❖❖
❖ Center
This mode erases the center margin of the
original image.
❖
❖❖
❖ Center/Border
This mode erases both the center and edge
margins of the original image.
Note
❒ The default setting of the erased margin is as
follows:
❒ You can change the width of the erased mar-
gins as follows:
❒ You can change this settings with the User
Tools.⇒ p.117 “Erase Border Width”, p.117
“Erase Center Width”
❒ The width of the erased margin varies de-
pending on the reproduction ratio.
❒ If the size of the original is different from sizes
listed in the following chart, the erased margin
might be shifted.
❖
❖❖
❖ Metric version
Metric
version
10mm
Inch ver-
sion
0.4"
Metric
version
2 – 99mm (in 1mm steps)
Inch ver-
sion
0.1" – 3.9" (in 0.1" steps)
Where Original
Is Placed
Paper Size and Orientation
Exposure glass
A3
L
, B4
L
, A4
KL
, B5
KL
Optional docu-
ment feeder (ADF)
A3L, B4L, A4KL, B5KL,
A5KL , 8
1
/
2
"
×
13"L, 8KL,
16KL
To Next Page
Loading...
