Lanier Copier System Edition - Configuring Netbeui for Printing

Operating Instructions Administrator Reference 2
14
Configuring NetBEUI for Printing
Follow these instructions to configure the Network Interface Board and Windows 2000 to use the Net-
BEUI protocol.
Configuring the printer
Configure the printer to use the NetBEUI protocol.
• Confirm that the NetBEUI protocol is set to be active. (The factory default is active.)
Reference
For more information about how to make the above settings, see "Windows 2000 Configuration" in
Printer Client Reference 1 that comes with this printer.
Configuring a Windows 2000 computer
Follow these steps to configure a Windows 2000 computer to use the NetBEUI protocol.
A
AA
A
Click [Start] on the taskbar, point to [Settings], and then click [Network and Dial-up Connections].
B
BB
B
Click [Local Area Connection]. On the [File] menu, click [Properties].