Operating InstructionsFacsimile Reference (option) <Advanced Features>
212
Forwarding Mark
You can print a Forwarding Mark on the receiv-
er's messages which have been forwarded.
The receiver can distinguish between forwarded
messages and usual receptions.
You can specify whether or not to print a For-
warding Mark in the User Parameters. ⇒ p.216
“Changing the User Parameters” (Switch02,
Bit0)
Memory Lock
When you switch Memory Lock on, received
messages are stored in memory and are not print-
ed automatically. When a message is received in
the Memory Lock mode, the Confidential File
(i) indicator blinks. To print this message, en-
ter the Memory Lock ID. A user without the ID
cannot print the message. This prevents an unau-
thorized person from seeing the message.
Preparation
❒ To use Memory Lock, program the Memory
Lock ID and then switch Memory Lock on.⇒
p.260 “Programming a Memory Lock ID”
A
AA
A
Press the {
{{
{User Tools/Counter}
}}
} key.
B
BB
B
Press [Facsimile Features].
The Facsimile Features menu is shown.
To Next Page
Loading...
