Operating Instructions Administrator Reference 2
108
Important
❒ If the specified paper size differs from the size of paper actually set in the paper tray, a paper
misfeed might occur because the paper size is not detected correctly.
Note
❒ The tray fence for the optional 2000-sheet Large Capacity Tray is fixed. If you need to change
the paper size, contact your service representative.
Paper Size Settings
2
/
3
❖
❖❖
❖ Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
❖
❖❖
❖ The paper types you can set for the bypass tray are as follows:
• No Display, Recycled Paper, Special Paper, Color Paper, Letterhead, Preprinted Paper,
Punched Paper, Label Paper, Bond Paper, Cardstock, Thick Paper, OHP, Plain: Dup. Back,
Thick: Dup. Back
Note
❒ Default: No display
❒ Letterhead is not available for printer function.
❖
❖❖
❖ Paper Type (Tray1–4)
Sets the display so you can see what type of paper is loaded in each of the paper trays. This infor-
mation is used by the print function to automatically select the paper tray.
To Next Page
Loading...
