Punch
55
1
Punch
The optional 2 Tray Finisher and the Punch Kit are required.
This function is used to punch holes in copies.
Note
❒ The optional Punch Kit varies depending on the geographic area. See the fol-
lowing table for the one that suits your machine.
❖
❖❖
❖ 2 holes
❖
❖❖
❖ 3 holes
Name Hole number
Punch Kit Type 1045 EU 2 holes / 4 holes
Punch Kit Type 1045 SC 4 holes
Punch Kit Type 1045 NA 2 holes / 3 holes
To Next Page
Loading...
