Operating InstructionsFacsimile Reference (option) <Advanced Features>
82
Transfer Request
Transfer Request allows fax machines that have
this feature to automatically distribute incoming
messages to multiple fax destinations. This fea-
ture helps you save costs when you send the same
message to more than one place in a distant area,
and saves time since many messages can be sent
in a single operation.
The diagram below may make the concept clear-
er.
The Transfer Stations you specify must be ma-
chines of the same make as this machine and
have the Transfer Station function.
The following terminology is used in this section.
❖
❖❖
❖ Requesting Party
The machine where the message originates
from.
❖
❖❖
❖ Transfer Station
The machine that forwards the incoming mes-
sage to another destination.
❖
❖❖
❖ End Receiver
The final destination of the message or the
machine to which the Transfer Station sends
to. End Receivers must be programmed into
Quick Dials or Groups in the Transfer Station.
Preparation
❒ Before you can use this feature, you must pro-
gram the Polling ID and your own fax number.
⇒ p.259 “Programming a Polling ID”, p.255
“Transfer Report”
❒ The Transfer Stations you specify must be
machines of the same make as this machine
and have the Transfer Station function.
To Next Page
Loading...
