5
Operating Instructions Copy Reference <Advanced Features>
Introduction
This manual contains detailed instructions on the operation and maintenance of this machine. To get
maximum versatility from this machine all operators should carefully read and follow the instructions
in this manual. Please keep this manual in a handy place near the machine.
Please read “Safety Information” in Administrator Reference 1 Copier System Edition before using this
machine. It contains important information related to USER SAFETY and PREVENTING EQUIP-
MENT PROBLEMS.
-
--
-Notes
Some illustrations may be slightly different from your machine.
Certain options may not be available in some countries. For details, please contact your local dealer.
Fax options are not sold in some areas.
Operator Safety
This machine is considered a CDRH class 1 laser device, safe for office/EDP use. The machine contains
two 7-milliwatt, 645-660 nanometer wavelength, GaAIAs laser diodes. Direct (or indirect reflected)
eye contact with the laser beam might cause serious eye damage. Safety precautions and interlock
mechanisms have been designed to prevent any possible laser beam exposure to the operator.
Laser Safety:
The Center for Devices and Radiological Health (CDRH) prohibits the repair of laser-based optical unit
in the field. The optical housing unit can only be repaired in a factory or at a location with the requisite
equipment. The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser
chassis is not repairable in the field. Customer engineers are therefore directed to return all chassis and
laser subsystems to the factory or service depot when replacement or the optical subsystem is required.
To Next Page
Loading...
