205
Operating InstructionsFacsimile Reference (option) <Advanced Features>
8. Key Operator Setting
Function List
Feature name Description Reference
Transmission Page Count Check the transmission and recep-
tion, and totals on the display.
⇒ p.207 “Counters”
Forwarding Transfers received messages to a reg-
istered receiver (forwarding destina-
tion).
⇒ p.208 “Forwarding”
Memory Lock Reception Switch the Memory Lock to on or off.
To use it, register an ID for printing a
message received in Memory Lock
mode.
⇒ p.212 “Memory Lock”
ECM If a part of the transmission fails due
to a telephone line fault, this feature
resends the failed part automatically.
⇒ p.214 “ECM”
Parameter Setting Allows you to change and print the
function settings to meet your needs.
⇒ p.216 “Changing the User Param-
eters”
Program Special Sender By programming particular receivers
as Special Sender in advance, you can
have the Special Senders to treated
differently.
⇒ p.227 “Programming/Changing
Special Senders”
Box Setting By using SUB and SEP Codes with
these functions, you can send mes-
sages to another party's box and re-
trieve messages stored in boxes.
⇒ p.238 “Box Settings”
Transfer Report Before using Transfer Request, you
need this Transfer Report setting.
⇒ p.255 “Transfer Report”
To Next Page
