Lanier Copier System Edition - Error & Status Messages on the Control Panel; 3 Troubleshooting

45
Operating Instructions Maintenance Guide 2 Copier System Edition
3. Troubleshooting
Error & Status Messages on the Control Panel
❖
❖❖
❖ Status Messages
Messages Description Solution
Color is being adjusted The printer is calibrating the color. Wait for a while.
Hex Dump Mode In Hex Dump Mode No action required.
Initializing Unit The printer is initializing the develop-
ment unit.
Wait for a while.
Do not turn the main power switch
off while the machine is being initial-
izing.
Loading Toner... The printer is loading the toner. Wait for a while.
Offline The printer is offline and cannot print
data.
Press {
{{
{OnLine}
}}
}.
Please wait The printer is warming up or loading
the toner.
Wait until the printer signals Ready.
Printing... The printer is doing print job. Wait for a while.
Ready The default ready message. The
printer is ready to use.
No action required.
Resetting job... Job is being reset. Wait for a while.
Waiting... The printer is waiting for the next
data to print.
Wait for a while.