Lanier Copier System Edition - When Connected with Dial-Up Access

Operating Instructions Scanner Reference
113
When Connected With Dial-up Access
When the machine is connected to a network, observe the following points when setting up the machine
or changing settings.
For more details, see the documentation and Help for ScanRouter V2 Lite/Professional and DeskTop-
Binder V2 Lite/Professional.
❖
❖❖
❖ When a dial-up router is connected in a network environment
The settings for the delivery server to be connected must be made appropriately for the machine with
ScanRouter V2 Link, or DeskTopBinder V2 Lite/Professional. In addition, appropriately set up con-
nected devices with the I/O settings of ScanRouter V2 Administration Utility.
If the network environment changes, make the necessary changes for the delivery server with the
machine, administration utility of client computers, ScanRouter V2 Link, and DeskTopBinder V2
Lite/Professional. Also, set the correct information for the connected device with the I/O settings of
Administration Utility.
Important
❒ When the software is set up to connect to the delivery server via a dial-up router, the router will
dial and go online whenever connection to the delivery server is initiated. Telephone charges
may be incurred.