Operating Instructions Scanner Reference
114
❖
❖❖
❖ When connected to a computer that uses dial-up access
• Do not install ScanRouter V2 Lite/Professional on a computer which uses dial-up access.
• When using ScanRouter V2 Lite/Professional, DeskTopBinder V2 Lite/Professional, ScanRout-
er V2 Link, or TWAIN driver on a computer with dial-up access, dial-up may be performed when
connecting to the delivery server and other equipment, depending on the setup. If the computer
is set up to connect to the Internet automatically, the confirmation dialog box will not appear,
and telephone charges may be incurred without the user being aware of it. To prevent unneces-
sary dial-ups, the computer should be set up so that the confirmation dialog box is always dis-
played before establishing a connection. Do not make unnecessary dial-ups when using the
above listed software.
❖
❖❖
❖ When working in a WAN environment
In a WAN environment, do not use the ScanRouter V2 Link or other administration utility installed
on a client computer. In some network environments, time-out may occur and normal delivery may
not be possible.
To Next Page
Loading...
