98
Operating Instructions Scanner Reference
7. Appendix
The Relationship between the Resolution and the Data
Size
The relationship between the resolution and the data size is mutually contradictory. When the resolution
(dpi) is set to a high value, the scanning area becomes smaller. Inversely, when the scanning area is set
larger, the resolution becomes lower.
When the network delivery scanner and Document Server are used, the relationship between the scan-
ning resolution and the data size is shown below. If the data size is too large, the message "Exceeded
max. data capacity. Check the scanning resolution." appears on the control panel of the machine. Spec-
ify the scan size and resolution again.
Limitation
❒ Depending on the image compression level, the maximum image size will be limited.
Reference
❒ For information about the relationship between the resolution and the scanning area when the ma-
chine is used as the network TWAIN scanner, see the TWAIN driver help.
❖
❖❖
❖ When the "Text", "Text/Photo", or "Photo" is selected as the Scan Type
All combinations up to A3/11"x17" (297mm×432mm) and 600 dpi are possible.
To Next Page
Loading...
