Operating InstructionsFacsimile Reference (option) <Advanced Features>
127
Printed Report
Memory Storage Report
This report is printed after an original is stored in
memory. It helps you review the contents and the
destinations of stored originals. Even if the ma-
chine is set up not to print this report, it is still
printed if an original could not be stored.
Note
❒ You can turn this report on and off. ⇒ p.216
“Changing the User Parameters” (Switch03,
Bit2)
❒ You can choose whether to include part of the
original image on the report. ⇒ p.216 “Chang-
ing the User Parameters” (Switch04, Bit7)
❒ If you use Parallel Memory Transmission, the
Memory Storage Report will not be printed.
Transmission Result Report (Mem-
ory Transmission)
This report is printed when a Memory Transmis-
sion is completed so you can check the result of
the transmission. If two or more destinations are
specified, this report is printed after the fax mes-
sage has been sent to all the destinations. If the
machine is set up not to print this report and the
fax message could not be successfully transmit-
ted, a Communication Failure Report is printed.
⇒ p.128 “Communication Failure Report”
Note
❒ You can turn this function on or off with the
User Parameters. ⇒ p.216 “Changing the
User Parameters” (Switch03, Bit0)
❒ You can choose whether to include part of the
original image on the report.⇒ p.216 “Chang-
ing the User Parameters” (Switch04, Bit7)
❒ The “Page” column gives the total number of
pages. The “Not Sent” column gives the num-
ber of pages that could not be sent success-
fully.
To Next Page
Loading...
