Lanier Copier System Edition - Scanning Originals

Operating Instructions Scanner Reference
64
Scanning Originals
This section explains the method for scanning a single original following p.63 “Flow of Operations”.
A
AA
A
Start up DeskTopBinder V2 Lite and select the driver of the scanner.
A
AA
A Click [Start], point to [Program], and then [DeskTopBinder V2] from [DeskTopBinder V2].
DeskTopBinder V2 Lite starts up.
B
BB
B Click [Scanner Settings] from the [Tools] menu.
The [Scanner Settings] dialog box appears.
If the scanner is already selected, no scanner settings are necessary. Check [File format for
scanned image(s)] and go to step E.
C
CC
C Click [Select Scanner Driver].
The [Select Source] dialog box appears.
D
DD
D Click the machine name you want to use in the list, and then click [Select].
E
EE
E Click [OK].
The [Scanner Settings] dialog box closes.
B
BB
B
Place the original in the scanner.
Reference
❒ ⇒ p.53 “Setting Originals”
C
CC
C
Make the scan settings.
A
AA
A From the [File] menu, point to [Add Document], and then click [Scan].
The TWAIN driver starts up.
After a short while, the dialog box of the TWAIN driver that operates the scanner appears. This
dialog box is called the Scanner Control dialog box.