Operating Instructions Copy Reference <Advanced Features>
124
Input/Output
❖
❖❖
❖ Switch to Batch
The optional document feeder (ADF) is required.
You can select whether Batch mode or SADF mode is displayed when the machine is turned on,
reset, or automatically cleared.
Note
❒ Default: Batch (SADF)
❖
❖❖
❖ SADF Auto Reset
The optional document feeder (ADF) is required.
When you place one original at a time in the optional document feeder (ADF), the Auto Feed indi-
cator lights for a selected time after an original is fed to show that the optional document feeder
(ADF) is ready for another original. You can adjust this time from 3 seconds to 99. ⇒ “SADF
Mode”, Basic Features manual
Note
❒ Default: 5 seconds
❖
❖❖
❖ Rotate Sort: Auto Paper Continue
The optional hard disk unit (40 GB) is required.
You can specify whether to continue copying when the paper of the required orientation has run out
during rotate-sorting. ⇒ “Sort”, Basic Features manual
• If you select [
No
]:
When paper of the required orientation runs out, the machine stops copying and prompts you to
supply copy paper. When you load paper, the machine will continue copying.
To Next Page
Loading...
