Lanier Copier System Edition - Setting up as a Print Server

Operating Instructions Administrator Reference 2
53
Setting Up as a Print Server
A
AA
A
Log on to the file server as a Supervisor or a Supervisor equivalent.
B
BB
B
Run SmartNetMonitor for Admin.
C
CC
C
Click the [Group] menu and click [Open LAN] and select [IPX/SPX] or [TCP/IP].
A list of printers appears
Note
❒ If you use Pure IP, select [
TCP/IP
].
❒ If you cannot identify which printer to configure from the list of printers, print Configuration Page
from the printer and find the desired printer. For more information about printing Configuration
Page, see p.161 “Printing a Configuration Page”.
❒ If no printer name appears in the list, match the frame types of the IPX/SPX protocol between
the computer and printer. Use the [Network] dialog box of Windows to change the frame type of
the computer. For more information about changing the frame type of equipment, see "Config-
uring the Printer for the Network" in Administrator Reference 1.
D
DD
D
Click to select the printer you want to configure, and then click [NIB Setup Tool] on the [Tools]
menu.
Note
❒ If you use Pure IP, see p.55 “Using Pure IP in the NetWare 5 environment”
E
EE
E
Click to select [Wizard], and then click [OK].
F
FF
F
Type the device name into the [Device Name] box and comment into the [Comment] box as nec-
essary, and then click[Next].