Lanier Copier System Edition - Page 283

Operating Instructions Administrator Reference 2
54
G
GG
G
Select the [NetWare] check box, and then click [Next].
H
HH
H
Click to select [NDS Mode], type the file server name into the [File Server Name:] box, the NDS
tree name into the [NDS Tree:] box and the context into the [NDS Context:] box, and then click
[Next].
In the [File Server Name:] box, type the name of the file server in which a print server is to be created.
You can also select a file server from the list that appears by clicking [Browse].
Clicking [Browse], you can select a NDS context among those listed in the [Browse] dialog box.
As a context, object names are typed from a lower object and divided by a period. For example, if
you want to create a print server into NET under DS, type "NET.DS".
I
II
I
Type the print server name into the [Print Server Name] box, printer name into the [Printer
Name] box, print queue name into the [Print Queue Name] box, and print queue volume into the
[Print Queue Volume], and then click [Next].
• In the [Print Server Name] box, type the name of the NetWare print server within 47 characters.
• In the [Printer Name] box, type the name of the NetWare printer.
• In the [Print Queue Name] box, type the name of the print queue to be added to NetWare.
• In the [Print Queue Volume], type the volume of print queue. As a volume, object names are typed
from a lower object and divided by a period. You can select a volume by clicking [Browse].
J
JJ
J
After confirming the settings, click [Next].
The settings take effect, and the NIB setup tool exits.
K
KK
K
Exit SmartNetMonitor for Admin.